Multi-purpose trimmer
It cuts boards, three-sided blocks and edged slabs to exact lengths, with automatic feeding.
How it works
One trimmer for both lines
The B30 cuts boards, three-sided blocks and edged slabs to exact lengths, with automatic feeding and 2 to 6 heads. It has a clamp system to separate the blocks.
As it works with blocks and with edged slabs, it can go in the cant line as well as in the slab line.
- 2 to 6 heads
- Automatic feeding
- Clamps to separate the blocks individually
- Boards, three-sided blocks and edged slabs
Technical data
Specifications
| Number of heads | 2–6 |
|---|---|
| Maximum cutting height | 150 mm |
| Maximum timber passage length | 290–600 mm |
| Minimum piece length between saws | 290 mm |
| Saw blade diameter | 500–600 mm |
| Saw motor power | 5–15 HP |
| Hydraulic power | 10 HP |
| Feed speed | 20–30 m/min |
| Electrical connection | 3 × 380 V – 50 Hz |
| Approximate net weight | 3,000 kg |
Where it works
Its place in the line
Typical line, with this machine's step highlighted. The layout of each line is worked out with each sawmill: timber, production and available space.
Typical cant line
Usual layout for long cants · the multi-rip saw, which produces the boards, normally closes the line-
01
Edger
-
02
Optional
Splitter
-
03
Trimmer
-
04
Multi-rip saw
Typical slab line
Usual layout · boards also come out of the slabs-
01
Optional
Centring device
-
02
Slab edger
-
03
Slab trimmer
-
04
Optional
Singulator
-
05
Slab multi-rip saw
The configuration of the lines, both cant lines and slab lines, depends on the customer's sawmill.
- Optional depending on the installation
- B43 alternative at the same step
- cutting line
Do you want to know how it fits into your installation?
Tell us about your sawmillFrequently asked questions about the B30
Which lines can it be installed in?
In both: the cant line and the slab line.
What is its capacity?
From 2 to 6 heads, a maximum cutting height of 150 mm and a feed speed of 20 to 30 m/min.
Projects with the B30
See all-

Replacement of a cant line
Segovia, Spain
-

Cant line with B31 and B27N, and new slab line
Badajoz, Spain
-

-

Cant line with B27N edger, B41 splitter and B30 trimmer
Teruel, Spain
Related machines
See all machineryInterested in the B30?
Tell us about your production and we will advise you.
