Skip to content
+34 670 33 11 43
B27CEdgers

Slab edger

Slab edger with 2 or 3 circular saw blades of 450 mm. In the 3-blade version, the centre blade is retractable to cut one piece or two.

18–150 mmcutting height
250 mmmaximum cutting width
2 or 3450 mm saw blades

Ask about this machine

Basic information on data protection
Controller
INASEMA S.L.
Purpose
To reply to your enquiry and, if you ask for it, to send you information or a quotation.
Legal basis
Your consent.
Recipients
Data are not disclosed to third parties, except where required by law.
Rights
Access, rectification, erasure and other rights, as explained in the privacy policy.

* Required fields

How it works

Edged slabs, one piece or two

The B27C cuts the sides of the slab, the half-moon piece that comes off the edging. It is built with 2 or 3 circular saw blades of 450 mm: in the 2-blade version, both blades are symmetrical; in the 3-blade version, the outer blades are symmetrical and the centre one is retractable, to cut one piece or two.

It cuts heights from 18 to 150 mm and a maximum width of 250 mm, with a minimum length of 800 mm; the maximum length is made to order. In the slab line, the edged slab then goes on to the trimmer and the slab multi-rip saw.

  • 2-blade version with symmetrical blades
  • 3-blade version with a retractable centre blade
  • One piece or two, depending on the centre blade
  • 7.5 HP hydraulic unit

Technical data

Specifications

Technical specifications of the Slab edger
Number of saw blades 2 or 3
Saw blade arrangement 2 symmetrical, or 3 with a retractable centre blade
Cutting height 18–150 mm
Maximum cutting width 250 mm
Minimum cutting length 800 mm
Maximum cutting length Made to order
Saw blade diameter 450 mm
Saw arbor power 20–30 HP
Hydraulic power 7.5 HP
Electrical connection 3 × 380 V – 50 Hz
Approximate net weight 2,800–3,500 kg*

* Value depends on the machine configuration.

Where it works

Its place in the line

Typical line, with this machine's step highlighted. The layout of each line is worked out with each sawmill: timber, production and available space.

Typical slab line

Usual layout · boards also come out of the slabs
  1. 01 Optional

    Centring device

  2. 02

    Slab edger

  3. 03

    Slab trimmer

    B30
  4. 04 Optional

    Singulator

  5. 05

    Slab multi-rip saw

    B42

The configuration of the lines, both cant lines and slab lines, depends on the customer's sawmill.

  • Optional depending on the installation
  • cutting line

Do you want to know how it fits into your installation?

Tell us about your sawmill

Frequently asked questions about the B27C

What dimensions does it take?

Cutting height from 18 to 150 mm, a maximum cutting width of 250 mm and a minimum cutting length of 800 mm. The maximum length is made to order.

What is the difference between the 2-blade and the 3-blade version?

In the 2-blade version, both blades are symmetrical. In the 3-blade version, the outer blades are symmetrical and the centre one is retractable, so it can cut one piece or two.

Related machines

See all machinery

Interested in the B27C?

Tell us about your production and we will advise you.