Single-arbor horizontal multi-rip saw
Automatic horizontal multi-rip saw with one arbor of circular saw blades, for cutting boards from timber planks.
How it works
Boards from planks
The B43 is an automatic horizontal multi-rip saw with one arbor of circular saw blades, which cuts boards from planks. Its variable saw-change system allows different blade diameters: thinner blades for lower cuts and larger, thicker blades for higher cuts. This way it cuts boards from 60 to 150 mm high.
The feed is mixed, with toothed rollers and a track chain, driven by hydraulic motors, and its speed is easy to adjust. An overload detector comes as standard: if the saws are strained during cutting, the feeds stop automatically until the motor returns to its optimum condition.
- One horizontal arbor of circular saw blades
- Saw change for different diameters
- Boards from 60 to 150 mm high
- Mixed feed: toothed rollers and track chain
- Adjustable feed speed
- Overload detector as standard
Technical data
Specifications
| Cutting height | 60–150 mm |
|---|---|
| Maximum timber width | 450 mm |
| Motor power | 100–180 HP |
| Cutting speed | 5–35 m/min |
| Feed | Toothed rollers and track chain, hydraulic |
| Suction | Required in the installation |
Where it works
Its place in the line
Typical line, with this machine's step highlighted. The layout of each line is worked out with each sawmill: timber, production and available space.
Typical cant line
Usual layout for long cants · the multi-rip saw, which produces the boards, normally closes the line-
01
Edger
-
02
Optional
Splitter
-
03
Trimmer
-
04
Multi-rip saw
The configuration of the lines, both cant lines and slab lines, depends on the customer's sawmill.
- Optional depending on the installation
- B43 alternative at the same step
- cutting line
Do you want to know how it fits into your installation?
Tell us about your sawmillFrequently asked questions about the B43
What timber does it take?
Timber up to 450 mm wide, which it cuts into boards from 60 to 150 mm high.
Does it need suction?
Yes, the installation needs suction to extract the sawdust.
Projects with the B43
See all-

Cant line with B27N edger and B43 multi-rip saw
Barcelona, Spain
Related machines
See all machineryInterested in the B43?
Tell us about your production and we will advise you.

