Skip to content
+34 670 33 11 43
B27NEdgers

Automatic cant edger

Cant edger with circular saw blades, toothed steel rollers and a top guide presser.

420 mmmaximum cutting width
60–205 mmcutting height
2independent heads

Ask about this machine

Basic information on data protection
Controller
INASEMA S.L.
Purpose
To reply to your enquiry and, if you ask for it, to send you information or a quotation.
Legal basis
Your consent.
Recipients
Data are not disclosed to third parties, except where required by law.
Rights
Access, rectification, erasure and other rights, as explained in the privacy policy.

* Required fields

How it works

Clean sides, cant to size

The B27N cuts the sides of the cant with two independent heads, with toothed steel rollers and a top guide presser. Its drive and size setting are hydraulic; it can also be driven by servo motors.

Depending on the installation, the slabs coming out of the edger go to a slab line.

  • 2 independent heads
  • Toothed steel rollers
  • Top guide presser
  • Hydraulic or servo-motor setting

Technical data

Specifications

Technical specifications of the Automatic cant edger
Number of heads 2, independent
Maximum cutting height 160–205 mm
Minimum cutting height 60 mm
Maximum cutting width 420 mm
Minimum cutting length 800 mm
Saw blade diameter 500 / 550 / 600 mm
Saw arbor power 30–60 HP
Hydraulic power 15 HP
Feed speed 0–50 m/min*
Electrical connection 3 × 380 V – 50 Hz
Approximate net weight 5,500 kg

* Value depends on the machine configuration.

Where it works

Its place in the line

Typical line, with this machine's step highlighted. The layout of each line is worked out with each sawmill: timber, production and available space.

Typical cant line

Usual layout for long cants · the multi-rip saw, which produces the boards, normally closes the line
  1. 01

    Edger

  2. 02 Optional

    Splitter

    B41
  3. 03

    Trimmer

    B30
  4. 04

    Multi-rip saw

The configuration of the lines, both cant lines and slab lines, depends on the customer's sawmill.

  • Optional depending on the installation
  • B43 alternative at the same step
  • cutting line

Do you want to know how it fits into your installation?

Tell us about your sawmill

Frequently asked questions about the B27N

What dimensions does it take?

Cutting height from 60 mm up to a maximum of 160 to 205 mm, a maximum cutting width of 420 mm and a minimum cutting length of 800 mm.

Can it feed the multi-rip saw directly?

Yes. We have installed it with an automatic infeed to the multi-rip saw in projects from 2022 and 2026.

Projects with the B27N

See all

Related machines

See all machinery

Interested in the B27N?

Tell us about your production and we will advise you.