Double-arbor multi-rip saw
Circular multi-rip saw with a double vertical arbor and four powered roller trains. Robust and highly reliable.
How it works
Strength and efficiency in every cut
The B24N is a circular multi-rip saw with a double vertical arbor and a reinforced structure for stable, accurate and long-lasting cuts. Four powered roller trains, with toothed rollers with hard chrome treatment and hydraulic traction, give a firm, continuous and safe feed.
With manual and automatic adjustment, it works with different timber widths and corrects irregularities. In a cant line it normally goes at the end and cuts the boards. Sawdust is managed by decantation, suction or a mixed system.
- Double vertical arbor of circular saw blades
- Four powered roller trains
- Toothed rollers with hard chrome treatment
- Hydraulic traction: firm, continuous and safe feed
- Manual and automatic adjustment for different timber widths
- Sawdust management by decantation, suction or a mixed system
Technical data
Specifications
Available in 2 variants: B24N/300 · B24N/350.
| Feature | B24N/300 | B24N/350 |
|---|---|---|
| Cutting height | 65–150 mm | 65–200 mm |
| Maximum cutting width | 340 mm | |
| Minimum cutting length | 800 mm* | 1,000 mm* |
| Saw blade diameter | 300 mm | 350 mm |
| Saw motor power | 60–150 HP* | |
| Hydraulic power | 10 HP | |
| Feed speed | up to 46 m/min | up to 40 m/min |
| Weight | 6,000 kg* | |
| Electrical connection | 3 × 380 V – 50 Hz | |
* Value depends on the machine configuration.
Where it works
Its place in the line
Typical line, with this machine's step highlighted. The layout of each line is worked out with each sawmill: timber, production and available space.
Typical cant line
Usual layout for long cants · the multi-rip saw, which produces the boards, normally closes the line-
01
Edger
-
02
Optional
Splitter
-
03
Trimmer
-
04
Multi-rip saw
The configuration of the lines, both cant lines and slab lines, depends on the customer's sawmill.
- Optional depending on the installation
- B43 alternative at the same step
- cutting line
Do you want to know how it fits into your installation?
Tell us about your sawmillFrequently asked questions about the B24N
What variants are there?
B24N/300 and B24N/350. The B24N/300 cuts heights from 65 to 150 mm, with 300 mm saw blades and a feed speed of up to 46 m/min. The B24N/350 cuts from 65 to 200 mm, with 350 mm saw blades and up to 40 m/min. On both, the maximum cutting width is 340 mm.
Can the infeed and outfeed be adapted to my sawmill?
Yes. We have installed the B24N with custom or special infeed and outfeed in projects from 2019 and 2023.
Projects with the B24N
See all-

Replacement of a cant line
Segovia, Spain
-

B24N multi-rip saw with custom infeed and outfeed
Soria, Spain
-

-

Related machines
See all machineryInterested in the B24N?
Tell us about your production and we will advise you.

